Passage:
Passage-IV The simplest method of welding two pieces of metal together is known as pressure welding. The ends of metal are heated to a white heat — for iron, the welding temperature should be about 1300°C — in a flame. At this temperature the metal becomes plastic. The ends are then pressed or hammered together, and the joint is smoothed off. Care must be taken to ensure that the surfaces are thoroughly clean first, for dirt will weaken the weld. Moreover, the heating o f iron or steel to a high temperature cause oxidation, and a film o f oxide is formed on the heated surfaces. For this reason, a flux is applied to the heated metal. At welding heat, the flux melts, and the oxide particles are dissolved in it together with any other impurities which may be present. The metal surfaces are pressed together, and the flux is squeezed out from the centre o f the weld. A number of different types of weld may be used, but for fairly thick bars o f metals, a vee-shaped weld should normally be employed. It is rather stronger than the ordinary butt weld.
When iron is heated to about 1300 degree centigrade
- Aflames turn from white to blue
- Bchemical reaction starts
- Coxide film is found on its surfaces
- Dit turns into steel
Explanation
The passage states that at white heat — about 1300°C for iron — the metal becomes plastic, and crucially: 'the heating of iron or steel to a high temperature causes oxidation, and a film of oxide is formed on the heated surfaces.' This oxidation is precisely why a flux is applied. The 1300°C heating therefore produces an oxide film on the surfaces. Hence option (C) is correct.